£9.95 delivery on orders excluding certain products & postcodes *
A one component solvent based acrylic eggshell finish coat designed for use as part of Steelguard intumescent fire coatings.
A high activity TBT-free self-polishing antifouling, Complies with IMO Antifouling Systems Convention.
A two component high build micaceous iron oxide pigmented polyamide cured recoatable epoxy coating.
For use on both internal and external surfaces on boats and ships, for both maintenance and the improvement of aesthetics.
A high build polyamide low temperature tintable zinc phosphate epoxy shop primer/coating for atmospheric conditions.
Formulated to prevent corrosion under insulation (CUI) of carbon steel and stainless steel.
A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°...
A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.
A 2 pack, moisture curing, low zinc silicate prefabrication primer For automatic application on shot blasted steel plates.
A two component multipurpose polyamide anti-corrosive epoxy paint system from PPG.
A two component multi purpose polyamide cured anti-corrosive epoxy paint system from PPG.
A 2 pack flint reinforced solvent free polyamine cured, epoxy compound suitable for the protection of steel and concrete.
A two component polyamide-cured epoxy tiecoat for a wide range of topcoats for immersion and non-immersion service.
A 3 pack, solvent free, self leveling epoxy floor coating. For industrial areas with heavy traffic on concrete.
A two component, solvent free, amine cured epoxy coating for use as a chemical resistant, surface tolerant tank lining.
A 2 part surface tolerant high solid glass flake epoxy coating. For use in offshore splash zone maintenance.
A 1 pack thin film solvent borne intumescent coating for 120 minutes of cellulosic fire protection of structural steelwork.
A 1 pack thin film solvent borne intumescent coating for 90 minutes protection of structural steel against cellulosic fires.
A 1 pack thin film solvent borne intumescent coating for cellulosic fire protection up to 120 minutes on structural steel.
A fast curing, two component, high solids, high build zinc phosphate polyurethane primer / finish for in shop application to steel.
A two component, quick drying, anti-corrosive zinc epoxy primer for use onto suitably prepared steel.
A 1 pack, solvent based thin film intumescent coating for fire protection of structural steelwork for up to 120 minutes.
A 2 pack, glass flake reinforced novolac vinyl ester coating for new or old steel with excellent resistance to high temps and solvents.
A two-component, solvent-free, amine-cured modified phenolic epoxy tank coating suitable for aviation fuel.
A 2 pack, high build, amine adduct-cured novolac phenolic epoxy for offshore, marine and chemical / petrochemical sectors.
A 2 pack, high build, amine adduct-cured novolac phenolic epoxy primer for subsequent coats of PPG Phenguard Subsea 780.