£9.95 delivery on orders excluding certain products & postcodes *
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.
Anti corrosion system designed to withstand severe conditions and high temperatures up to 600° C.
A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.
A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.
Acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.
Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.
Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.
Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.
A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.
A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.
A two pack, high solid aluminium pigmented, low temperature curing modified epoxy mastic.
2 pack polyamide cured, zinc rich coating suitable for structural steel or piping exposed in corrosivity categories up to C5.
Intended to provide high corrosion protection, with a rapid cure in a single coat scheme.
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.
A 2K high build epoxy primer containing anticorrosive pigments.
An exterior scrim free intumescent coating for up to 120 minutes fire protection.
A solvent free, high build, two pack polyurethane mastic for steel, for the repair of pipe coatings and the coating of field joints.
A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.
A 2 pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
A tough, hard wearing finish coat for application over properly primed surfaces.
For use on a wide variety of substrates including hand prepared rusty steel.