£7.75 delivery on orders excluding certain products & postcodes *
Protects the surface of concrete floors or walls against capillary penetration of water.
Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure.
A silicon resin based primer in water dispersion to be used to regulate the absorption of the substrate before applying Silancolor Paint.
R2-class, rapid-setting shrinkage compensated thixotropic, fibre-reinforced, cementitious mortar applied in a single layer from 3 to 40mm thick, for r...
A rapid-setting fibre-reinforced structural cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete...
Two- component fillerized epoxy primer used before applying a range of single or two pack floor paints or epoxy and polyurethane resin systems.
Two-component water-based epoxy coating with a shiny finish, for concrete floors and cementitious substrates, to provide an anti-dust, oil resistant f...
A protective acrylic waterproof coat suitable for surfaces which are in permanent contact with water, such as flat roofs and water tanks.
Based on acrylic resins in water dispersion used to protect the surfaces of concrete and cement renders from aggressive agents present in the atmosphe...
A silicone resin based, breathable paint that has the advantages of traditional mineral based paints as well as synthetic paints.
A ready to use, UV resistant, long-lasting, acrylic paint for internal and external use.
A two-component multi-purpose neutral-coloured epoxy formulate in water dispersion to create vapour-permeable coatings on industrial floors.
A filling and evening layer for covering small imperfections in cementitious surfaces before applying a finish coat from the Mapei Silancolor range.
Recommended for protecting marble, granite or natural stone facings against graffiti drawn with spray-paint, crayons, markers, etc.
Recommended for all surfaces not previously treated with graffiti-repellent protection against conventional spray-paints.
Acrylic resin undercoat in water dispersion to even out the absorption of substrates before applying other products.
A solvent-based fixing primer with high penetration properties for porous substrates and curing agent for repair mortars.
An easy to use general purpose bitumen waterproofing emulsion for cold waterproofing masonry and concrete vertical and sloping surfaces.
Self-levelling industrial floor screed based on special hydraulic binders for abrasion-resistant flooring, thickness from 5 to 40mm.
A single pack, solvent free, moisture curing, rapid drying polyurethane membrane, with low VOC's, for waterproofing cementitious screeds.
A two-component epoxy coating suitable for self-levelling and or multi-layer resin flooring with or without a non-slip finish.
Water repellent cementitious skimming mortar with fine, natural finish for concrete and plastic, glass and porcelain coatings.
2 component cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools.
Two-component, rapid drying elastic cementitious mortar for waterproofing terraces and balconies, even at at low temperature.
Two-component solvent free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds.
An easy to apply on suitably prepared masonry substrates general purpose render for internal and external use.
A solvent free bitumen primer for evening out and improving bonding to substrates before applying a waterproofing product from the Mapei Plastimul ran...