Full Product Catalogue

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

A general purpose thinner designed to improve the flow of Jotun Tankguard paints.

A general purpose solvent based thinner designed to improve the flow of Jotun inorganic zinc ethyl silicate products.

A quick drying single pack acrylic resin based topcoat for use as a finishing coat for application to either steel or concrete substrates.

A two component transparent polyamide cured high molecular weight epoxy sealer coating for concrete.

A paint thinner designed to improve the flow of Jotun paints inorganic zinc ethyl silicates being applied at high temperatures.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.

A one component waterborne acrylic thin film 90 minute intumescent coating.

Very good fouling coating that assures a totally active surface continuously renewed providing a clean hull for the whole season.

A single component, fast drying, glossy alkyd touch dry in 20 minutes for garages, workshops or light use areas.

A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....

A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.

An easy to use one component alkyd primer featuring good adhesion properties and surface tolerance.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail/Railtrack approved. Highways Approved Item No.169.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A single component oxidatively drying alkyd coating for engines, topside, deck and superstructure.

A one part oxidatively drying alkyd coating, that is a fast drying, high build, zinc phosphate pigmented primer or mid coat in atmospheric environment...

An industry approved topcoat for metal and coated surfaces subject to highly atmospheric environments.

Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.

A general purpose thinner for most conventional Jotun alkyd or oil based paints.

A two pack polyamine cured phenolic / novolac epoxy coating that is specially formulated for tank lining.

A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.

A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.