Full Product Catalogue

An economical one coat primer/finish. Quick drying with high sheen level.

A general purpose anti-corrosive metal primer, giving a high build matt finish.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

A single component, fast drying, high build alkyd shop primer that is suitable for mild to moderate corrosive environments.

A highly cross-linked, two component, high build epoxy phenolic coating.

A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.

A two-component epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.

A primer, intermediate or finishing coat in Hempatex systems in moderately corrosive environment.

A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.

A high quality enamel for use at temperatures up to 600°C indirect heat.

For wood, GRP, steel and ferro-cement yachts and motor boats, used on all interior surfaces to provide a protective finish.

Designed to withstand heats of up to 425°C in sheltered or interior environments.

An interior/exterior adhesion primer that can be applied to all interior and exterior walls, ceilings, doors, trim, fascia, soffits, galvanised steel,...

A versatile, high performance maintenance coating.

Fast drying acrylic resin aerosols that provide a bright metallic appearance with the durable protection of a standard topcoat.

Provides an attractive matt finish for barbecues, grates, radiators etc.

A metallic zinc that allows conductivity in the dried film layer.

Cathodic Protection for Metal Teamac Zinc Rich Primer P/201/252 for metal, cold galvanising.

Grey, highly reactive, fast drying and offers excellent adhesion to concrete, steel, aluminium, fibreglass and wood.

A primer that offers excellent stain blocking & alkali resisting properties across multiple substrates.

A 2 part etch primer suitable for achieving adhesion of polyurethane to all types of aluminium and other metal types where adhesion is problematic.

Additive for the production of a durable corrosion inhibiting coating made with Betofix RM or Betofix R2.

A primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles. Use with Centrecoat MMA products.

Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.

A high gloss, rapid drying finish for application to bare steel.

A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.

Suitable for a many environments including extreme heat up to 300°C. Designed for steel surfaces.

A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.