Full Product Catalogue

A thixotropic, two part, polyurethane modified epoxy joint filling compound for vertical and horizontal joints.

A two part, epoxy wall coating suitable for use alongside resin flooring to provide a continuous seamless finish.

A two pack, solvent free, epoxy resin suitable for below ground or damp environments where concrete cannot be dried out.

A two pack gas resistant waterproof coating for waterproofing and protecting concrete structures.

A 2 pack polyurethane sealer designed to protect concrete surfaces, providing a hygienic and durable floor.

A two component epoxy mastic coating for repair and maintenance.

2 pack high solids, high build, polyamide cured epoxy for general purpose protection to steel and concrete structures.

For use on concrete floors in industrial and storage facilities, repair shops.

A 2 pack high build anti-corrosive epoxy mastic for high film thicknesses for smaller maintenance and repair jobs.

A 2 pack polyamine cured epoxy mastic coating. A surface tolerant, abrasion resistance, high solids, high build product.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A 2 pack solvent free amine cured phenolic/novolac epoxy. Specially designed tank lining with very good chemical resistance.

2 pack cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools.

A 2-part, low odour, low viscosity, multi-purpose epoxy resin. Used as an epoxy primer, levelling mortar and mortar screed.

An epoxy adhesive ideal for bonding a wide range of building materials to one another.

A 2 pack rapid curing and versatile chemical resistant sealer / clear coating.

A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.

A self-priming coating for steel and concrete. Formerly PPG SigmaCover 640 / Amerlock 400C.

A 2 pack, fast drying, high solids, low temperatures epoxy coating for concrete and steel. LUL Cert 1329.

A hard wearing two-component water based epoxy floor paint and wall paint for interior use.

A fast drying anti slip floor coating that can be applied in low temperatures down to freezing.

A high performance epoxy system for application at temperatures down to 0°C.

A hard wearing two-component water based epoxy floor paint and wall paint for interior use. NEW FORMULATION

A tough 2 pack epoxy finish coat For concrete that offers good abrasion and chemical resistance in corrosive environments.

For garage, warehouses floors, concrete, tiles, ferrous steel, stainless steel, timber and galvanised steel.

Mortar that will work at temperatures as low as -35°C.

A two pack epoxy resin oil tolerant primer.

Reinforced coating to provide tank bottom refurbishment with a 14 hour return to service.