Full Product Catalogue

A concentrated heavy duty alkaline cleaner for cleaning heavily soiled plastic type material and contemporary cladding.

A quick drying, low odour, primer/finish coat, with stain blocking, and anti corrosion, which can be tinted to most colours.

Anti-corrosive paint and adhesion primer for iron and steel surfaces as well as aluminium outdoors and indoors.

An industrial detergent used for degreasing oily or soiled surfaces prior to painting.

A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.

A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.

A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.

A two-component, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.

An oleoresinous general purpose aluminium paint with good heat resistance and good light reflection.

A two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and colour retention.

A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.

A water-borne, acrylic dispersion paint with good anti-corrosive properties.

Very good fouling coating that assures a totally active surface continuously renewed providing a clean hull for the whole season.

A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.

A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.

A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.

A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.

A two-component polyamide adduct-cured epoxy paint. BBA Cert. no. 08/H135-PS11. Highways Approved Item No.159.

A solvent based super adhesion primer for use on PVDF and PDVF2 metal profile cladding.

SigmaCover 690 LT (Aluprimer Winter Grade) for temperatures of 0°C up to +10°C.

Designed to offer a metallic hammered finish to metallic objects with a fast drying time.

A metallic zinc that allows conductivity in the dried film layer.

Cathodic Protection for Metal Teamac Zinc Rich Primer P/201/252 for metal, cold galvanising.

An extra brilliant heat resistant paint formulated to resist heats of up to 150°C.

Grey, highly reactive, fast drying and offers excellent adhesion to concrete, steel, aluminium, fibreglass and wood.

A silicone resin based coating designed for resisting heats of up to and including 750°F or 400°C.

A 2 part etch primer suitable for achieving adhesion of polyurethane to all types of aluminium and other metal types where adhesion is problematic.

A two component coating for use in atmospheric and immersed environments.