Full Product Catalogue

Designed to offer a metallic hammered finish to metallic objects with a fast drying time.

A metallic zinc that allows conductivity in the dried film layer.

Cathodic Protection for Metal Teamac Zinc Rich Primer P/201/252 for metal, cold galvanising.

An extra brilliant heat resistant paint formulated to resist heats of up to 150°C.

Grey, highly reactive, fast drying and offers excellent adhesion to concrete, steel, aluminium, fibreglass and wood.

A silicone resin based coating designed for resisting heats of up to and including 750°F or 400°C.

A 2 part etch primer suitable for achieving adhesion of polyurethane to all types of aluminium and other metal types where adhesion is problematic.

A two component coating for use in atmospheric and immersed environments.

Acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.

A two component epoxy mastic coating for repair and maintenance.

Slow hardener for Selemix Direct Pro 7-159.

A solvent based super adhesion primer for use on PVDF and PDVF2 metal profile cladding.

Provides excellent adhesion to smooth surfaces such as galvanised steel, stainless steel, aluminium, glass, porcelain etc.

Stain killer with high hiding formula. One coat is all that is needed to cover and seal most surfaces.

Safekote polyurethane coating incorporating non-slip particles that provide an attractive slip-resistant surface for wet or dry.

A one part oxidatively drying alkyd coating, that is a fast drying, high build, zinc phosphate pigmented primer or mid coat in atmospheric environment...

A one component physically drying acrylic, high build, fast drying coating with a matt finish for application direct to metal.

This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.

A 2 pack epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.

A 2 pack high build anti-corrosive epoxy mastic for high film thicknesses for smaller maintenance and repair jobs.

A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.

A 2 pack polyamine cured epoxy mastic coating. A surface tolerant, abrasion resistance, high solids, high build product.

A 2 pack polyamide cured vinyl epoxy based coating. Formulated as a tie coat between epoxy primers and anti-fouling systems.

A universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.

A 2 pack, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.

A two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and colour retention.

Very good fouling coating that assures a totally active surface continuously renewed providing a clean hull for the whole season.

A 1 pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.