Full Product Catalogue

Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.

A high build polyamide cured recoatable epoxy coating.

A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116

A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.

Solvent Based Stain Killer, high hiding formula. One coat is all that is needed to cover and seal most surfaces including suspended ceiling tiles and ...

A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.

Formerly Liquid Plastics Sterimatt 206W. A hygienic waterborne modified acrylic resin surface coating with a matt finish.

A high performance epoxy system for application at temperatures down to 0°C.

Safekote polyurethane coating incorporating non-slip particles that provide an attractive slip-resistant surface for wet or dry.

For use on concrete floors in industrial and storage facilities, repair shops; e.g. process or paper machine units and corridors.

A single pack heavy duty elastomeric floor paint for interior and exterior use such as drives, paths and warehouse floors.

Fast Setting for Deep Holes in Concrete and Power Floated Floors and slabs.

Mortar that will work at temperatures as low as -35°C.

Highly concentrated solution for roofs, guttering and driveways which destroys moss, mould and fungi on patios drives etc.

Rustoleum-Mathys Impregnation Primer 5401 is a solvent free, two component epoxy primer for concrete floors.

A R3 repair and protect mortar for smoothing and levelling concrete.

A biodegradable heavy-duty cleaner and degreaser. Formulated to remove heavy contamination from porous and hard substrates including oil stains.

A fast drying primer, primarily for indoor use on a range of different substrates.

A high build epoxy paint suited for application at low temperatures.

A non-skid coating for steel decks and concrete in corrosive environments.

A two pack epoxy varnish with good penetration properties, for use in cold climates.

A degreaser suitable for use on a range of different surfaces.

A two-pack solvent free epoxy coating designed for use as a primer for epoxy mortars and screeds.

An epoxy vertical repair mortar for walls and overhead repairs of concrete.

Reinforced coating to provide tank bottom refurbishment with a 14 hour return to service.

A slip resistant, long lasting paint for use on macadam and concrete tennis courts.

An eco friendly, water-based line marking paint ideal for outdoor sports surface marking.

A solvent based high performance sealer which is suitable for heavily trafficked areas.