Full Product Catalogue

For wood, GRP, steel and ferro-cement yachts and motor boats, used on all interior surfaces to provide a protective finish.

A heat resistant aluminium pigmented polysiloxane paint for the protection of hot pipelines up to 600°C.

Designed to withstand heats of up to 425°C in sheltered or interior environments.

A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.

A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.

A quick-drying alkyd primer containing zinc phosphate. Ideal for the protection of steel.

Single pack, cold galvanizing, zinc rich sacrificial primer for steel.

A 2K high build epoxy primer containing anticorrosive pigments.

An anti-corrosive primer/finish for the Agricultural, Construction and Earth moving equipment sector.

A general purpose high gloss finish for Structural Steel.

An exterior scrim free intumescent coating for up to 120 minutes fire protection.

An epoxy powder coating particularly suitable for storage tanks for the water industry.

Solvent based primer and topcoat for ultimate corrosion protection in low temperatures.

Acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.

Slow reactive thinner for use with Selemix Direct Pro 7-159.

Suitable thinner for use with Selemix Direct Pro 7-159.

Slow hardener for Selemix Direct Pro 7-159.

A direct to metal user friendly rapid curing epoxy.

Suitable for a many environments including extreme heat up to 300°C. Designed for steel surfaces.

Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.

A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.

A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

A single pack medium to high temperature coating that withstands continuous temperature up to 400ºC, and peaks up to 540°C.

Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

A quick drying, gloss, brush applied container and skip metal paint.

A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.