Full Product Catalogue

Resists temperatures up to 750°C. Suitable for bare metal or slightly rusted surfaces, for BBQ's engines, heat cannons, pipes, and vents.

Metal Cladding Primer - Plastisol Cladding Paint Primer for use on Mobile Homes, Caravans and Industrial Units.

A fast drying solvent-based epoxy resin base. Contains rust inhibitive pigments to protect all metal surfaces.

For GRP, wood, steel and ferro-concrete hulls in low fouling areas with speeds of up to 8 knots.

A smooth gloss metallic coating that acts as an anti rust primer and topcoat all in making it ideal for outdoor use.

A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...

Offers excellent penetration straight through the rust to the metal, driving out air and moisture (the causes of rust).

A cruiser grade ablative antifouling paint suitable for vessels with a maximum speed of 25-30 knots.

An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112

Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

A high performance epoxy system for application at temperatures down to 0°C.

An easy to use one component alkyd primer featuring good adhesion properties and surface tolerance.

A white, non-yellowing, paint that offers a dead matt finish over water-stained ceilings / walls.

Suitable for dry heat 450°C. Designed for use on damaged galvanized surfaces.

Formulated for application to new, bare steel, blasted steel or galvanized steel surfaces to provide a clear finish. Copper, chrome, silver, bronze, n...

A high build anti corrosive protection for steel and galvanised steel structures. For fences, galvanised ducts/cladding etc.

For wood, GRP, steel and ferro-cement yachts and motor boats, used on all interior surfaces to provide a protective finish.

A heat resistant aluminium pigmented polysiloxane paint for the protection of hot pipelines up to 600°C.

Designed to withstand heats of up to 425°C in sheltered or interior environments.

A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.

A high solids, 2 pack epoxy brushing and spraying mastic, with micronised glass flake, aluminium and anti corrosives.

A flexible coating with good abrasion and impact resistance. BBA Cert No. 08/H135-PS5. Highways Approved Item No.110

For above and below the waterline on GRP fibreglass, wood, steel and ferro cement.

A two pack corrosion resistant metal primer formulated as a weldable pre-construction primer or field or shop applied primer.

A high build solvent free epoxy offering a smooth tile like finish, excellent protection against solvents and oils.

Lead Free light industrial flexible, rust inhibiting metal topcoat and primer. Tintable to over 30,000 colours.

Advanced coating offers quicker drying and reduced risk when curing at sub-zero temperatures.