£9.95 delivery on orders excluding certain products & postcodes *
An aluminium flake based finishing top coat with a satin finish of pure aluminium.
A film galvanising touch up to match a hot dip galvanised surface in an easy-to-use semi gloss aerosol.
Anti corrosion system designed to withstand severe conditions and high temperatures up to 600° C.
A high spec, 2 pack, anti corrosion intermediate MIO coat for steel structures at risk from severe abrasion.
A one pack moisture curing, polyurethane, MIO paint designed to replace normal cold tar products.
Zinga EP Thinner HS is the recommended thinning solution for Zingaceram HS.
A quick drying, satin, water based, non-yellowing enamel for interior and exterior woodwork.
A 100% acrylic resin, high performance primer coat designed for use under Bedec Aqua Advanced.
A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.
A base coat formulated to even out surfaces by filling defeats on old render prior to Mapei Silexcolor Top Coat.
A varnish enriched with polyurethane resin that is odourless, colourless, protective and decorative water based varnish for interior wood.
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...
A high build 2-pack polyamide cured epoxy zinc phosphate primer finish for use as an internal flow coating for pipelines.
A two component polyamide-cured epoxy tiecoat for a wide range of topcoats for immersion and non-immersion service.
A two component, solvent free, amine cured epoxy coating for use as a chemical resistant, surface tolerant tank lining.
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.
A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.
An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.
A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.
A water based TCEO free, thin film intumescent coating for up to 90 minutes fire protection on structural steel.
A water based TCEP free, thin film intumescent coating providing protection for up to 120 minutes on structural steel.
A water based CEP free thin film intumescent coating to provide fire resistance up to 120 minutes on structural steel.
A silicic acid based cleaning concentrate to remove contamination and mould release agents from concrete surfaces.