Full Product Catalogue

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.

A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

A two component polyamide cured vinyl epoxy based coating that is specially designed as a tie coat between epoxy primers and anti-fouling systems.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component water borne epoxy coating for corrosion protection. Designed for where short dry to handle and over coating times are required.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.

Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.

A two component chemically curing epoxy coating that is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and ba...

Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.

Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.

A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.

A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.

A fast drying anti slip floor coating that can be applied in low temperatures down to freezing.

A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.

A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.

A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...

A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....

A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

A one part physically drying water borne acrylic coating, formulated as a shop primer designed for high welding and cutting speed.

A two component solvent free amine cured epoxy coating. It is specially designed for potable drinking water tanks.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.