Full Product Catalogue

A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.

A versatile quick drying, single pack anti-corrosive primer for steel.

A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

A general purpose anti-corrosive metal primer, giving a high build matt finish.

A single pack, single coat, metal and Plastisol cladding paint.

A two-component epoxy polyamide shop primer, pigmented with zinc phosphate rust-inhibiting pigments.

A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.

A quick drying alkyd primer, containing zinc phosphate to enhance it's anti-corrosion properties.

A two-component epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.

A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.

A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.

A flexible coating with good abrasion and impact resistance. BBA Cert No. 08/H135-PS5. Highways Approved Item No.110

An anti corrosive, metal primer for iron and steel.

A high build, fast drying corrosion inhibiting primer for structural steel in grey, red and other colours.

Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.

A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.

A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...

A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.

A fast drying primer with good anti-corrosive properties and is suitable for steel and metal substrates.

A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.

Provides rapid cure and overcoating even under low temperature conditions.

A 2 pack, high gloss, low VOC, high solids, fast curing, acrylic polyurethane primer / finish pigmented with zinc phosphate.

A one pack alkyd primer containing zinc phosphate anti-corrosive pigment.