Full Product Catalogue

A clear sealer for walls, floor and roof tiles, granite, stone, brick, sandstone, limestone, travertine, concrete etc.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.

A concrete repair for uneven, damaged or worn out concrete and power floated floors. Can be applied from 3mm to 15mm thick.

Designed to give a non skid topcoat to steps, grips, handles, hand tools and many other applications.

A solvent free water repellent suitable for mineral based building materials such as concrete.

A colourless water-repellent impregnator treatment based on silicon compounds in water solution.

A silicate paint that optimises air quality, making use of the MiNox effect, photo-active pigment can decompose organic pollutants and odours.

A ultra high performance, transparent, siloxane resin, water-repellant impregnator to protect exposed concrete, stone, bricks and tiles from rain.

A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.

A high performance renovating cleaner for removing algae growth from porous hard ground surfaces such as patios.

A heavy duty general purpose hard surface maintenance cleaner.

A versatile, effective, solvent based graffiti remover for delicate surfaces that are painted or non painted.

A biodegradable heavy duty cleaner and degreaser designed to remove heavy contamination from porous and hard substrates.

Suitable for most exterior surfaces such as new or previously painted wood, uPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, sto...

A tough anti-slip aliphatic polyurethane floor coating, which forms a colour-fast, abrasion and weather resistant film.

A water based crystallization product formulated to block moisture transmission in concrete and masonry structures.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

Formulated for short term indentification onto concrete, tarmac, wood, composites, grass etc.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A one part, high flow, rapid, high strength cementitious grout.

A fast curing two part polyester anchoring adhesive that is solvent and styrene free.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

Designed to remove rust stains from delicate surfaces, when other rust removers cannot be used due to their corrosive nature.

A single pack, solvent borne, acrylic resin based, thermoplastic primer for concrete and block paving.

A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

A waterborne acrylic copolymer surface dust binding treatment for concrete and masonry surfaces.