Full Product Catalogue

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.

Anti corrosion system designed to withstand severe conditions and high temperatures up to 600° C.

A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.

Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.

Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

A two pack corrosion resistant metal primer formulated as a weldable pre-construction primer or field or shop applied primer.

A two pack, high solid aluminium pigmented, low temperature curing modified epoxy mastic.

Intended to provide high corrosion protection, with a rapid cure in a single coat scheme.

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

A 2K high build epoxy primer containing anticorrosive pigments.

An exterior scrim free intumescent coating for up to 120 minutes fire protection.

A solvent free, high build, two pack polyurethane mastic for steel, for the repair of pipe coatings and the coating of field joints.

A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

A two component, metallic zinc primer for steel in aggressive environments.

A quick drying two component epoxy primer for immersed or exposed conditions within a system.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

For application to steel tank internals.