£7.75 delivery on orders excluding certain products & postcodes *
A rapidly recoatable primer for epoxy and polyurethane systems exposed to abrasion and chemical stress.
Provides rapid cure and overcoating even under low temperature conditions.
A 2 pack, high gloss, low VOC, high solids, fast curing, acrylic polyurethane primer / finish pigmented with zinc phosphate.
A one pack alkyd primer containing zinc phosphate anti-corrosive pigment.
An epoxy primer which provides optimised control where thin film application is required.
A fast curing epoxy primer for use with International 3200 product series.
A quick-drying alkyd primer containing zinc phosphate. Ideal for the protection of steel.
A 2 pack zinc phosphate epoxy wet blast primer for application to surfaces which have been prepared by wet abrasive blasting.
Grey, highly reactive, fast drying and offers excellent adhesion to concrete, steel, aluminium, fibreglass and wood.
A self-priming, two-component, high build epoxy paint containing zinc phosphate.
A two pack epoxy anti-corrosive primer for application to steel which is clean and free from scale and / or rust.
An anti corrosive, metal primer for iron and steel.
A high build, fast drying corrosion inhibiting primer for structural steel in grey, red and other colours.
Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.
A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.
A fast drying primer with good anti-corrosive properties and is suitable for steel and metal substrates.
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.
A versatile quick drying, single pack anti-corrosive primer for steel.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
A general purpose anti-corrosive metal primer, giving a high build matt finish.
A single pack, single coat, metal and Plastisol cladding paint.
A two-component epoxy polyamide shop primer, pigmented with zinc phosphate rust-inhibiting pigments.
A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.