£7.75 delivery on orders excluding certain products & postcodes *
An anti corrosive, metal primer for iron and steel.
A high build, fast drying corrosion inhibiting primer for structural steel in grey, red and other colours.
Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.
A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.
A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
A fast drying primer with good anti-corrosive properties and is suitable for steel and metal substrates.
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
A rapidly recoatable primer for epoxy and polyurethane systems exposed to abrasion and chemical stress.
Provides rapid cure and overcoating even under low temperature conditions.
A 2 pack, high gloss, low VOC, high solids, fast curing, acrylic polyurethane primer / finish pigmented with zinc phosphate.
A one pack alkyd primer containing zinc phosphate anti-corrosive pigment.
An epoxy primer which provides optimised control where thin film application is required.
A fast curing epoxy primer for use with International 3200 product series.
A quick-drying alkyd primer containing zinc phosphate. Ideal for the protection of steel.
A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
A general purpose anti-corrosive metal primer, giving a high build matt finish.
A single pack, single coat, metal and Plastisol cladding paint.
A two-component epoxy polyamide shop primer, pigmented with zinc phosphate rust-inhibiting pigments.
A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.
A quick drying alkyd primer, containing zinc phosphate to enhance it's anti-corrosion properties.
A two-component epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.
A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.