C2 Environments

C2 Environments externally typically are mostly rural areas with atmospheres with a low level of pollution. Internally, C2 environments are unheated buildings where condensation may occur. Examples include depots, warehouses and sports halls.

 

Scroll to the bottom of this page for a full list of suppliers and their specifications.


Download the manufacturer specifications for steel systems below:

Carboline | Hempel | International | Jotun | PPG | Selemix | Sherwin Williams | Sika | Teamac | Teknos
Guide To Working In Confined Spaces

Shop By
Filter by
  1. Manufacturer Selemix Remove This Item
  2. Substrate Steel, Bare Remove This Item
Filter by

2 Items

Set Descending Direction
  1. Selemix 7-410 / 7-412 Epoxy Topcoat
    Selemix 7-410 / 7-412 Epoxy Topcoat

    A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.

    From £129.47 £107.89
  2. Selemix Direct Polyurethane Topcoat
    Selemix Direct Polyurethane Topcoat

    A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.

    From £41.65 £34.71
per page