NORSOK Approved Paints

A 2 pack amine adduct cured phenolic epoxy finish. A finish coat within a system for the protection of subsea equipment.

A 2 pack high build heat resistant phenolic epoxy coating for use under insulation systems. Protects up to 230°C.

A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...

Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference

A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

A two-pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail/Railtrack approved. Highways Approved Item No. 185.

A two component chemically curing high gloss aliphatic acrylic polyurethane coating that offers resistance to UV degradation and good chemical resista...

A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°...

A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.

A hard wearing, anti slip extra heavy duty deck coating system. NORSOK M-501 and BS.476 Part 7: Surface spread of flames

A 2 pack flint reinforced solvent free polyamine cured, epoxy compound suitable for the protection of steel and concrete.

A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating with a selected blend of fused aluminium oxide.

A 2 part surface tolerant high solid glass flake epoxy coating. For use in offshore splash zone maintenance.

A 2 pack, solvent free, thick film epoxy exterior intumescent coating that provides passive hydrocarbon fire protection for up to 4 hours on structura...

A flake filled MIO amine cured epoxy phenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures.

A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.

A 2 pack high build anti-corrosive epoxy mastic for high film thicknesses for smaller maintenance and repair jobs.

A 2 pack, glass flake reinforced novolac vinyl ester coating for new or old steel with excellent resistance to high temps and solvents.

A 2 pack, high build, amine adduct-cured novolac phenolic epoxy primer for subsequent coats of PPG Phenguard Subsea 780.

A 2 pack chemically curing epoxy coating that is a shop primer for high welding and cutting speed, giving reduced weld porosity and back burning.

A universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.

A tough 2 pack epoxy finish coat For concrete that offers good abrasion and chemical resistance in corrosive environments.

A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.

A 2 pack high build polyamine adduct cured epoxy coating. Primarily designed for use in offshore splash zone maintenance.

Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.

A high solids, 2 pack epoxy brushing and spraying mastic, with micronised glass flake, aluminium and anti corrosives.

A 2 pack solvent free amine cured phenolic/novolac epoxy. Specially designed tank lining with very good chemical resistance.