£7.75 delivery on orders excluding certain products & postcodes *
Promain supply the complete range of paints specified by the Highways Agency, which are commonly known as Item numbers, these are paints that have been tested and approved for the Highways Agency providing them with a quality controlled range of products from manufactures such as PPG Sigma (formerly known as Ameron), Amercoat, Mebon and Mebopro. Other manufacturers such as Leigh’s Paints who have now been acquired by Sherwin Williams, 3M, Hempel, Jotun, and Dacrylate Paints, also offer a range of coatings that fit the Highways Agency criteria.
A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116
A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.
A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
Transgard TG116 two pack epoxy undercoat for abraded surfaces. Highways Item 116.
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123
An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112
A two-component polyamide adduct cured, high build epoxy paint. BBA Cert No. 08/H135-PS6. Highways Approved Item No.111
A two-pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail/Railtrack approved. Highways Approved Item No. 185.
A high performance fast drying acrylic urethane semi-gloss finish for use where long term exterior colour retention is required. Highways Agency Item ...
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.
A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.
A two-component polyamide adduct-cured epoxy paint. BBA Cert. no. 08/H135-PS11. Highways Approved Item No.159.
A flexible coating with good abrasion and impact resistance. BBA Cert No. 08/H135-PS5. Highways Approved Item No.110
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces. Highways Agency Item No.110
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.
A self-priming epoxy with good impact and abrasion resistance. BBA Cert. no. 08/H135-PS1. Highways Approved Item No.123.
An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.
SigmaCover 690 LT (Aluprimer Winter Grade) for temperatures of 0°C up to +10°C.