Anglo Floor Paint is a hard wearing single pack floor paint that is easy to apply and fast drying, ideal for painting large concrete floors internally and externally such as workshops, garages and factories floors.
Anglo Floor Paint has been formulated from polyurethane technology which makes the paint highly durable and chemical/ solvent resistant. It can be used to transform old and worn concrete floors as well as protecting new concrete surfaces both internal and external. This paint is also self-priming and can also be used for dust sealing. Another great advantage is the fast drying time - floors can be returned to service in as little as 12 hours. It is available in 10 colours and will provide a mid-sheen finish that is easy to clean.
When applied to a suitably prepared concrete substrate Anglo Floor Paint is ideal for factory floors, workshops, kitchens, food prep area, car parks, cement screed, warehouse floor, garage floors, concrete driveways plus many more.
Anglo floor paint is best used for sealing and painting substrates such as concrete floors, cement screeds, garage floors, indoor car parks, factories, workshops, kitchens, industrial environments, basements, stairs, concrete drives, food prep areas plus many more
Before application of Anglo Floor Paint concrete substrates will need to be fully cured, clean, dry and free from any lose material. If laitance is present on the surface (a soft, easily crumbled skin) this will need to be removed by either mechanically abrading or acid etching.
Anglo Floor Paint is best applied via roller to a prepared surface. 2 coats will be required applying the second as soon as the first coat has dried approx. 12 hours at 20° Celsius.
Allow to cure for a minimum of 12 hours at 20° Celsius before allowing light foot traffic. Always consult the manufacturer’s technical datasheet prior to use.
- Anglo Floor Paint
- Single pack polyurethane
- Can be used internal and external
- Theoretical coverage of 8m2 per litre per coat
- Available in 10 colours Solvent and oil resistant
- Easy to clean
- Over coat after minimum 12 hours at 20° Celsius
- Return to service after minimum 12 hours at 20° Celsius
- Always consult the manufacturer’s technical datasheet prior to use