£7.75 delivery on orders excluding certain products & postcodes *
Promain supply the complete range of intumescent steel fire protection paints and coatings which can be used on metal. These coatings can be for both internal and external metals such as steel building construction. Our great range of flame resistant surface coatings provide the metal surface with a protective layer expanding with the heat from a fire which therefore protects the material below to maintain the structural stability of a metal building if there were to be a fire. From small uses such as BBQ grates to use on full buildings, we are sure to have the product that is perfect for you in our great range of flame resistant and fireproof coatings for metal surfaces.
Promain take our customers safety seriously, and therefore we are only more than willing to provide you with any information or advice you need regarding intumescent coatings for steel.
A solvent based intumescent mastic coating used for the repair of small areas of mechanical damage to Sherwin Williams Firetex range of intumescent co...
Offers Class 0 protection on masonry surfaces that have been already coated with up to 10 layers of conventional paint.
A water based white basecoat for the protection of internal structural steelwork in C1 and C2 environments. Fire resist up to 120 minutes.
A single component waterborne acrylic thin film intumescent coating for use to provide fire protection of structural steel exposed to cellluosic fire ...
A one pack acrylic thin film base coating for the protection for internal and semi exposed structural steelwork up to 60mins.
A single component, solvent based thin film intumescent coating for fire protection of structural steelwork for up to 120 minutes.
An gloss flame retardant topcoat finish to protect, seal and decorate over Thermoguard base coats within a system for 30 or 60 minute fire protection....
A decorative topcoat finish for use in a Thermoguard 30 - 60 minute fire protection system.
Provides a permanently ideal surface on steel for intumescent paint adhesion within a Thermoguard paint system.
A water based, white, thin film intumescent coating for the protection of internal structural steelwork.
A one component solvent based acrylic eggshell finish coat designed for use as part of Steelguard intumescent fire coatings.
A single pack, eggshell decorative top seal for use with Nullifire intumescent basecoats on internal or external steelwork.
Decorative Topseal for use with Nullifire Intumescent Basecoats.
A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.
A two pack, solvent free, thick film epoxy exterior intumescent coating that provides passive hydrocarbon fire protection for up to 4 hours on structu...
A decorative sheen top coat designed for internal environments over Sherwin Williams intumescent primers.
This product is now discontinued. See Sherwin Wiliams Firetex M90/02 as a potential alternative.
A Class '0' rated protective and decorative top coat for interior walls and trim, provides Class 0 protection on masonry surfaces.
Flameguard Ultra Acrylic Eggshell is a Class '0' fire rated protective and decorative top coat for interior walls and trim, easy to use as conventiona...
A Class 0 rated protective and decorative top coat for interior walls and trim. It is as easy to use as conventional paints and provides a high qualit...
A thin film, high gloss finish with exceptional weathering performance characteristics.
A single pack solvent-based thin film intumescent coating for up to 60 minutes on structural steel.
This product is now discontinued. See Sherwin Williams FX5062 as a potential alternative.
This product is now discontinued. See Sherwin Williams FX1003 as a potential alternative.
A single pack, thin film 120 minutes intumescent coating designed for site application via airless spray onto structural steel.