Full Product Catalogue

A single component, fast drying, glossy alkyd touch dry in 20 minutes for garages, workshops or light use areas.

A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....

A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.

A one part physically drying water borne acrylic coating, formulated as a shop primer designed for high welding and cutting speed.

An easy to use one component alkyd primer featuring good adhesion properties and surface tolerance.

A two component solvent free amine cured epoxy coating. It is specially designed for potable drinking water tanks.

A two pack acrylic isocyanate free topcoat with good gloss retention. Highways Approved Item No.168.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail/Railtrack approved. Highways Approved Item No.169.

A two-pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail/Railtrack approved. Highways Approved Item No. 185.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A two component chemically curing high gloss aliphatic acrylic polyurethane coating that offers resistance to UV degradation and good chemical resista...

A single component oxidatively drying alkyd coating for engines, topside, deck and superstructure.

A one part oxidatively drying alkyd coating, that is a fast drying, high build, zinc phosphate pigmented primer or mid coat in atmospheric environment...

An industry approved topcoat for metal and coated surfaces subject to highly atmospheric environments.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.

A general purpose thinner for most conventional Jotun alkyd or oil based paints.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

A general purpose thinner designed to improve the flow of Jotun Tankguard paints.

A general purpose solvent based thinner designed to improve the flow of Jotun inorganic zinc ethyl silicate products.

A quick drying single pack acrylic resin based topcoat for use as a finishing coat for application to either steel or concrete substrates.

A two component transparent polyamide cured high molecular weight epoxy sealer coating for concrete.

A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.

A paint thinner designed to improve the flow of Jotun paints inorganic zinc ethyl silicates being applied at high temperatures.

A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.