Full Product Catalogue

Perfect for use with the Hempadur range of marine coatings and can also be used to clean any painting tools.

Specifically designed for use with the Hempathane range of coatings from Hempel.

A two-component polyamide adduct cured, high build epoxy paint. BBA Cert No. 08/H135-PS6. Highways Approved Item No.111

Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

A self-priming, two-component, high-build, pure epoxy paint.

A high build epoxy coating for the protection of metal substrates against atmospheric corrosion. Network Rail Approved.

A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.

A self-priming, two-component, high build, pure epoxy paint which cures to an abrasion and corrosion resistant coating.

A two-component epoxy paint, which cures to a hard and tough coating.

A self-priming, two-component, high build epoxy paint containing zinc phosphate.

Formulated to obtain anti-skid properties on decks and other areas where a skid-proof surface is required.

Glossy, general purpose topcoat. For mildly to moderately corrosive environment. For exterior and interior usage.

Cleaner/Degreaser for use in the metal industry as well as ships and shipyards.

Thinner for use with Hempels Galvosil and Hempadur.

A primer, intermediate or finishing coat in Hempatex systems in moderately corrosive environment.

An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112

A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

A very quick-drying anti corrosive primer/finish pigmented with zinc phosphate.

A 2 pack epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.

A 2 pack, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.

A two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and colour retention.

A 2 pack semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

A 1 part, solvent borne, intumescent coating, for 60 minutes for protection of structural steel against cellulosic fires.

Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.

A very low VOC, 1 pack, waterborne acrylic thin film intumescent coating for passive fire protection of structural steel against cellulosic fires.

The suitable thinner for various products within the Hempel Shopprimer range.