Full Product Catalogue

Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.

A heat resisting, matt, air drying silicone resin based coating for steel surfaces.

A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.

A water based, quick drying gloss acrylic finish or sealercoat for Sherwin Williams FX Firetex intumescent product range.

A high performance fast drying acrylic urethane semi-gloss finish for use where long term exterior colour retention is required. Highways Agency Item ...

A hard wearing, anti slip extra heavy duty deck coating system. Reaches NORSOK M-501 and BS.476 Part 7: Surface spread of flames

A quick drying alkyd anti corrosive primer pigmented with zinc phosphate for the protection of steel.

A 3 pack epoxy high build anti slip deck coating, approved for MoD. UK MoD/DRA (Ministry of Defence) to DEF STAN 80 -134.

A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.

A single component anti-corrosive spraying or brushing primer for steel.

A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.

A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...

A high build 2-pack polyamide cured epoxy zinc phosphate primer finish for use as an internal flow coating for pipelines.

A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.

An M24 spec low temperature curing, surface and humidity tolerant two pack modified epoxy anti corrosive coating for long life steel protection.

A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.

A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.

An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.

A single pack, thin film 120 minutes intumescent coating designed for site application via airless spray onto structural steel.

A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.

A water based CEP free thin film intumescent coating to provide fire resistance up to 120 minutes on structural steel.

A solvent based intumescent mastic coating used for the repair of small areas of mechanical damage to Sherwin Williams Firetex range of intumescent co...

A two pack, solvent free, thick film epoxy exterior intumescent coating that provides passive hydrocarbon fire protection for up to 4 hours on structu...

A 1 pack inert multipolymeric matrix coating that outperforms alternatives in combating corrosion under insulation (CUI) and in high heat applications...

A solvent based, specially formulated product to use alongside compatible Sherwin Williams products.

A solvent based, specially formulated product to use alongside compatible Sherwin Williams products.

A solvent based, specially formulated product to use alongside compatible Sherwin Williams products.

A solvent based, specially formulated product to use alongside compatible Sherwin Williams products.