£7.75 delivery on orders excluding certain products & postcodes *
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A pre-treatment for galvanised steel which converts the surface nature to ensure the subsequent adhesion of a wide range of Johnstone's coatings.
A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.
A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.
A two component polyamide cured vinyl epoxy based coating that is specially designed as a tie coat between epoxy primers and anti-fouling systems.
A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.
Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.
A quick drying, low odour, primer/finish coat, with stain blocking, and anti corrosion, which can be tinted to most colours.
An industrial detergent used for degreasing oily or soiled surfaces prior to painting.
A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.
A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.
A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.
A highly cross-linked, two component, high build epoxy phenolic coating.
A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.
A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.
A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.
A two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and colour retention.
A water-borne, acrylic dispersion paint with good anti-corrosive properties.
A heat resistant aluminium pigmented polysiloxane paint for the protection of hot pipelines up to 600°C.
A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.
For garage, warehouses floors, concrete, tiles, ferrous steel, stainless steel, timber and galvanised steel.
Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.
Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.
A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.
A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.
Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.