Full Product Catalogue

A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.

A high quality enamel for use at temperatures up to 600°C indirect heat.

For wood, GRP, steel and ferro-cement yachts and motor boats, used on all interior surfaces to provide a protective finish.

Designed to withstand heats of up to 425°C in sheltered or interior environments.

An anti corrosive, metal primer for iron and steel.

Highly versatile, Xylene based, fast drying, durable, rust resistant gloss coating for metal.

A smooth gloss metallic coating that acts as an anti rust primer and topcoat all in making it ideal for outdoor use.

A white, non-yellowing, paint that offers a dead matt finish over water-stained ceilings / walls.

Suitable for dry heat 450°C. Designed for use on damaged galvanized surfaces.

Formulated for application to new, bare steel, blasted steel or galvanized steel surfaces to provide a clear finish. Copper, chrome, silver, bronze, n...

Provides an attractive matt finish for barbecues, grates, radiators etc.

A metallic zinc that allows conductivity in the dried film layer.

Cathodic Protection for Metal Teamac Zinc Rich Primer P/201/252 for metal, cold galvanising.

Grey, highly reactive, fast drying and offers excellent adhesion to concrete, steel, aluminium, fibreglass and wood.

A primer that offers excellent stain blocking & alkali resisting properties across multiple substrates.

A 2 part etch primer suitable for achieving adhesion of polyurethane to all types of aluminium and other metal types where adhesion is problematic.

Additive for the production of a durable corrosion inhibiting coating made with Betofix RM or Betofix R2.

A high gloss, rapid drying finish for application to bare steel.

A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.

Suitable for a many environments including extreme heat up to 300°C. Designed for steel surfaces.

A versatile, high performance maintenance coating.

A fast drying solvent-based epoxy resin base. Contains rust inhibitive pigments to protect all metal surfaces.

High solid resins and is low VOC with excellent sag resistance and a gloss finish, ideal for the protection of ferrous steel.

A low VOC, 2 pack, internally flexibilised, high build, low temperature curing down to -5°C.

A 2 pack epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.

An interior/exterior adhesion primer. For all interior and exterior walls, ceilings, doors, trim, fascia, soffits, galvanised steel, railings etc.

Fast drying acrylic resin aerosols. Provides a bright metallic appearance with the durable protection of a standard topcoat.

Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.