£9.95 delivery on orders excluding certain products & postcodes *
A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.
Anti Corrosive red oxide paint for Gates, Railings Tanks and General Steel Work.
A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.
A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.
A high-performance, water based acrylic floor paint for floors, driveways and paths. Recoatable in just 1 hour.
A water based white basecoat for the protection of internal structural steelwork in C1 and C2 environments. Fire resist up to 120 minutes.
A high build quick air-drying oxide primer for use on ferrous metals.
A one pack acrylic thin film base coating for the protection for internal and semi exposed structural steelwork up to 60mins.
Suitable for use in a range of markets where durable performance and aesthetics are needed.
Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration.
A general purpose, versatile paint offering economical protection and decoration for the maintenance of structural steel, cladding etc.
2 pack high solids, high build, polyamide cured epoxy for general purpose protection to steel and concrete structures.
A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.
A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
A 1 part physically drying water borne acrylic coating. A shop primer designed for high welding and cutting speed.
A 1 pack waterborne acrylic thin film intumescent coating. For structural steel exposed to cellluosic fire up to 120 minutes.
A single pack, thin film 120 minutes intumescent coating designed for site application via airless spray onto structural steel.
A 2 pack amine cured epoxy coating for new construction where short dry to handle and over coating times are required.
A universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.
A low VOC, high solids, rapid cure primer/finish. Excellent anti-corrosive qualities and long term colour / gloss durability.
A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.
A high performance, low VOC, water borne 2 pack epoxy with a high gloss finish for structural steel and concrete floors.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.