Full Product Catalogue

A two-component epoxy polyamide shop primer, pigmented with zinc phosphate rust-inhibiting pigments.

A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.

A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.

A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.

A two-component epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.

A fairly quick-drying alkyd paint for various substrates in mild to moderately corrosive environments.

A two-component, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.

A primer, intermediate or finishing coat in Hempatex systems in moderately corrosive environment.

A water-borne, acrylic dispersion based paint for interior and exterior moderate to sever corrosive environments.

For wood, GRP, steel and ferro-cement yachts and motor boats, used on all interior surfaces to provide a protective finish.

A heat resistant aluminium pigmented polysiloxane paint for the protection of hot pipelines up to 600°C.

Designed to withstand heats of up to 425°C in sheltered or interior environments.

A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.

A flexible coating with good abrasion and impact resistance. BBA Cert No. 08/H135-PS5. Highways Approved Item No.110

For above and below the waterline on GRP fibreglass, wood, steel and ferro cement.

A quick drying, tough, flexible paint designed for use on metal surfaces.

A high build solvent free epoxy offering a smooth tile like finish, excellent protection against solvents and oils.

Single pack metal primers for bare and lightly rusted metals, suitable for all uses up to heavy industrial applications.

Lead Free light industrial flexible, rust inhibiting metal topcoat and primer available in the Colour Shop range of 30,000 colours.

Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.

A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.

A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

A single pack medium to high temperature coating that withstands continuous temperature up to 400ºC, and peaks up to 540°C.

A quick drying, gloss, brush applied container and skip metal paint.

A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.