Full Product Catalogue

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.

A white spirit based, single pack quick drying primer for the protection of metal against corrosion.

Bollom Brosteel Ultra 60 intumescent paint fire proof paint for steelwork. Provides up to 60 minutes resistance.

A rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes.

A quick drying, gloss, brush applied container and skip metal paint.

Single Pack Primer for Steel, Aluminium and Zinc surfaces.

A fast drying anti-corrosive primer for steel surfaces.

A two component polyurethane paint with good gloss retention and colour stability.

An industrial detergent used for degreasing oily or soiled surfaces prior to painting.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

For use on a wide variety of substrates including hand prepared rusty steel.

Suitable for use as a finishing coat for protection of structural steel.

A single component, anti corrosive, one coat, rapid drying modified alkyd primer / finish.

A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

A two-component semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155

Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration, can also be used as part of a high pressur...

A high gloss coach enamel available in historic colours.

A general purpose, versatile paint offering economical protection and decoration for the maintenance of structural steel, cladding etc.

Lead Free low temperature anti-rust, corrosion resistant, top coat suitable for metal & plastic.

Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.

A high build polyamide cured recoatable epoxy coating.

A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116

A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.

Offers excellent penetration straight through the rust to the metal, driving out air and moisture (the causes of rust).