Full Product Catalogue

A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.

A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A one component physically drying acrylic, high build, fast drying coating with a matt finish for application direct to metal.

A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.

A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.

A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.

A functional coating for identification of hot spots and internal insulation failures.

A single component, water-based rust remover / cleaner gel for a range of substrates.

A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.

A fast drying anti slip floor coating that can be applied in low temperatures down to freezing.

A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.

A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.

A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...

A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....

A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

A one part physically drying water borne acrylic coating, formulated as a shop primer designed for high welding and cutting speed.

A two component solvent free amine cured epoxy coating. It is specially designed for potable drinking water tanks.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A one part oxidatively drying alkyd coating, that is a fast drying, high build, zinc phosphate pigmented primer or mid coat in atmospheric environment...

A two component protective coating for use in high traffic, atmospheric and immersed environments.