Full Product Catalogue

A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.

A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.

A single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.

A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.

Based on high solid resins and is low VOC with excellent sag resistance and a gloss finish, ideal for the protection of ferrous steel.

A fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...

A concentrated, solvent and acid free product for the regular maintenance of hulls, decks and other marine surfaces.

A waterbased quartz and solid surface cleaner containing a blend of surface active agents.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.

A unique new water based metal primer that can be used on most metal surfaces internally and externally, prior to painting.

Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.

A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.

A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

A single pack medium to high temperature coating that withstands continuous temperature up to 400ºC, and peaks up to 540°C.

A degreaser suitable for use on a range of different surfaces.

A universal pipe coating that provides external protection for process piping, valves and vessels.

A functional coating for identification of hot spots and internal insulation failures.

Formulated specifically to provide corrosion protection for the subsea market.

A water-based rust remover which is 100% biological degradable and free from toxins.