Full Product Catalogue

Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration, can also be used as part of a high pressur...

A high gloss coach enamel available in historic colours.

A general purpose, versatile paint offering economical protection and decoration for the maintenance of structural steel, cladding etc.

A high build, fast drying corrosion inhibiting primer for structural steel in grey, red and other colours.

Lead Free low temperature anti-rust, corrosion resistant, top coat suitable for metal & plastic.

Sigma AquaCover 400 two component polyamine cured water borne epoxy coating for steel and concrete.

Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.

Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.

A high build polyamide cured recoatable epoxy coating.

A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116

A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.

Offers excellent penetration straight through the rust to the metal, driving out air and moisture (the causes of rust).

A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.

A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....

A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

A fast drying primer with good anti-corrosive properties and is suitable for steel and metal substrates.

A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.

A one part physically drying water borne acrylic coating, formulated as a shop primer designed for high welding and cutting speed.

Anti Corrosive red oxide paint for Gates, Railings Tanks and General Steel Work.

A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.

A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.

A high-performance, water based acrylic floor paint for floors, driveways and paths. Recoatable in just 1 hour.

A primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles. Use with Centrecoat MMA products.

A one part, solvent borne, intumescent coating, optimised for 60 minutes for protection of structural steel against cellulosic fires.

A water based white basecoat for the protection of internal structural steelwork in C1 and C2 environments. Fire resist up to 120 minutes.

Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

A one component solvent based acrylic thin film intumescent coating.

Waterborne intumescent coating for fire protection of structural steelwork.