Full Product Catalogue

A solvent based super adhesion primer for use on PVDF and PDVF2 metal profile cladding.

Designed to offer a metallic hammered finish to metallic objects with a fast drying time.

A metallic zinc that allows conductivity in the dried film layer.

Cathodic Protection for Metal Teamac Zinc Rich Primer P/201/252 for metal, cold galvanising.

An extra brilliant heat resistant paint formulated to resist heats of up to 150°C.

A silicone resin based coating designed for resisting heats of up to and including 750°F or 400°C.

Teamac Metalastic Paint for Wooden and Metal Barns, Sheds and Farm Buildings, Water Tanks and Gutters.

For Aluminium, wood, GRP and steel hulled boats. Suitable for domestic and commercial vessels up to 30 knots.

Solvent Based Stain Killer, high hiding formula. One coat is all that is needed to cover and seal most surfaces including suspended ceiling tiles and ...

A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.

Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.

A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.

A two-component, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.

A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.

Very good fouling coating that assures a totally active surface continuously renewed providing a clean hull for the whole season.

A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.

A single pack product for improving the adhesion properties of solvent based surface coatings.

A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

A single pack medium to high temperature coating that withstands continuous temperature up to 400ºC, and peaks up to 540°C.

An ideal universal primer or single coat topcoat for steel, zinc or aluminium subject to severe abrasion or chemical stresses.

Quick-drying adhesion primer for priming and undercoating new and previously painted surfaces.

Single Pack Primer for Steel, Aluminium and Zinc surfaces.

Solvent based primer and topcoat for ultimate corrosion protection in low temperatures.