Full Product Catalogue

For quick repair of fine crack and holes in warehouse, workshop and concrete floors.

A two pack epoxy resin oil tolerant primer.

A very durable, solvent-based, spray applied textured coating with crushed marble aggregates and special preservative agents for algae and fungal film...

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure.

For garage, warehouses floors, concrete, tiles, ferrous steel, stainless steel, timber and galvanised steel.

A hard wearing two-component water based epoxy floor paint and wall paint for interior use.

A high build solvent free epoxy offering a smooth tile like finish, excellent protection against solvents and oils.

A fast drying anti slip floor coating that can be applied in low temperatures down to freezing.

Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.

Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.

A high build polyamide cured recoatable epoxy coating.

A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116

A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.

A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.

A high performance epoxy system for application at temperatures down to 0°C.

For use on concrete floors in industrial and storage facilities, repair shops; e.g. process or paper machine units and corridors.

Fast Setting for Deep Holes in Concrete and Power Floated Floors and slabs.

Mortar that will work at temperatures as low as -35°C.

Rustoleum-Mathys Impregnation Primer 5401 is a solvent free, two component epoxy primer for concrete floors.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.

A concrete repair for uneven, damaged or worn out concrete and power floated floors. Can be applied from 3mm to 15mm thick.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A fast curing two part polyester anchoring adhesive that is solvent and styrene free.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.