Full Product Catalogue

A versatile, high performance maintenance coating.

A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.

A 2 part etch primer suitable for achieving adhesion of polyurethane to all types of aluminium and other metal types where adhesion is problematic.

A self-priming, two-component, high build epoxy paint containing zinc phosphate.

A two pack epoxy anti-corrosive primer for application to steel which is clean and free from scale and / or rust.

Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

For use below the waterline and harsh marine environments.

A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.

A two pack gas resistant waterproof coating for waterproofing and protecting concrete structures.

Acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.

A direct to metal user friendly rapid curing epoxy.

A fast drying product, based on solvent-based epoxy resins that contains rust inhibitive pigments to protect all metal surfaces.

A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...

An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112

Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

A high performance epoxy system for application at temperatures down to 0°C.

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.

Anti corrosion system designed to withstand severe conditions and high temperatures up to 600° C.

A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.

A solvent free, high build, two pack polyurethane mastic for steel, for the repair of pipe coatings and the coating of field joints.

A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A tough, hard wearing finish coat for application over properly primed surfaces.

For use on a wide variety of substrates including hand prepared rusty steel.