NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

Sherwin Williams Macropoxy L425 - Formerly Leighs Epigrip
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.

From £158.24 £131.87
Sherwin Williams Macropoxy L574 - Formerly Leighs Metagard
Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.

From £110.02 £91.68
International Intertherm 3070
Formulated specifically to provide corrosion protection for the subsea market.

From £773.83 £644.86
International Interzinc 52E
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

From £347.63 £289.69
Jotun Jotamastic 87 GF Wintergrade
A two component protective coating for use in high traffic, atmospheric and immersed environments.

From £356.18 £296.82
Hempel Hempadur 4774D
A self-priming, two-component, high-build, pure epoxy paint.

From £287.09 £239.24
Hempel Hempadur Multi-Strength 45753
A self-priming, two-component, high build, pure epoxy paint which cures to an abrasion and corrosion resistant coating.

From £245.11 £204.26
Hempel Hempadur 47300
A two-component epoxy paint, which cures to a hard and tough coating.

£209.89 £174.91
International Interzone 954
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

From £123.78 £103.15
Jotun Marathon 550
A 2 pack structural steel and piping coating that will continue to cure while immersed.

From £351.36 £292.80
Jotun Hardtop Pro
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

From £169.39 £141.16
Carboline Thermaline 440 Topcoat Finish Formerly 400 EU Topcoat
Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

From £180.00 £150.00
Carboline Thermaline 440 Primer Formerly 400 EU Primer
Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.

£188.40 £157.00
Carboline Thermaline 450
Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

From £251.46 £209.55
Carboline Carboguard 891 VOC
An ultra high solids epoxy that is designed as a liner for potable water. FDA approved.

From £675.00 £562.50
Carboline Carbozinc 11
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

From £257.04 £214.20
Carboline Carbomastic 18 FC
A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

From £106.20 £88.50
Carboline Phenoline 353 LT
A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

From £313.80 £261.50
Jotun Barrier 80
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

£285.77 £238.14
Jotun Tankguard SF
A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.

From £521.92 £434.93
Sherwin Williams Nova-Plate UHS Epoxy Tank Lining
An ultra high solids epoxy novolac amine engineered specifically for immersion service in storage tanks.

From £602.02 £501.68
Sherwin Williams Dura-Plate UHS Epoxy Tank Lining
A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete surfaces industrial and marine exposures.

From £515.89 £429.91
Sherwin Williams Zinc Clad II EU Ethyl Zinc Silicate Primer
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

From £227.36 £189.47
Jotun Penguard Tie Coat 100
Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.

From £263.36 £219.47
Jotun Jotamastic 87 Aluminium WG
Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.

From £83.80 £69.83
Jotun Penguard Pro
Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

From £363.65 £303.04
Sherwin Williams Macropoxy C425V2 - Formerly Leighs Epigrip
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.

From £120.86 £100.72
Sherwin Williams Macropoxy 267 - Formerly Leighs Epigrip C267V3
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.

From £98.80 £82.33

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)