NORSOK Approved Paints

A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.

A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.

An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.

A two pack, solvent free, thick film epoxy exterior intumescent coating that provides passive hydrocarbon fire protection for up to 4 hours on structu...

A 1 pack inert multipolymeric matrix coating that outperforms alternatives in combating corrosion under insulation (CUI) and in high heat applications...

A flake filled MIO amine cured epoxy phenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.

A self-priming, two-component, high-build, pure epoxy paint.

A two component, moisture curing, zinc rich silicate coating used as a tank coating to provide excellent solvent and chemical resistance.

A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.

A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete surfaces industrial and marine exposures.

An ultra high solids epoxy novolac amine engineered specifically for immersion service in storage tanks.

A self-priming, two-component, high build, pure epoxy paint which cures to an abrasion and corrosion resistant coating.

A two-component epoxy paint, which cures to a hard and tough coating.

A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.

Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.

A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168

A two component flint reinforced solvent free polyamine cured, epoxy compound suitable for the protection of steel and concrete.

A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating with a selected blend of fused aluminium oxide.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.