NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

Jotun Tankguard SF
A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.

From £521.92 £434.93
Hempel Hempadur 4774D
A self-priming, two-component, high-build, pure epoxy paint.

From £287.09 £239.24
PPG SigmaGuard 750
A two component, moisture curing, zinc rich silicate coating used as a tank coating to provide excellent solvent and chemical resistance.

From £572.48 £477.07
PPG SigmaCover 522
A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.

From £333.41 £277.84
Sherwin Williams Dura-Plate UHS Epoxy Tank Lining
A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete surfaces industrial and marine exposures.

From £515.89 £429.91
Sherwin Williams Nova-Plate UHS Epoxy Tank Lining
An ultra high solids epoxy novolac amine engineered specifically for immersion service in storage tanks.

From £602.02 £501.68
Hempel Hempadur Multi-Strength 45753
A self-priming, two-component, high build, pure epoxy paint which cures to an abrasion and corrosion resistant coating.

From £245.11 £204.26
Hempel Hempadur 47300
A two-component epoxy paint, which cures to a hard and tough coating.

£209.89 £174.91
International Intertherm 50
A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.

From £192.89 £160.74
International Interzone 954
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

From £123.78 £103.15
Hempel Hempadur 15570
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.

From £50.95 £42.46
Sherwin Williams Acrolon 7300 Acrylic Finish
A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.

From £115.68 £96.40
Jotun Hardtop XP
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168

From £87.22 £72.68
PPG SigmaDur 550 H
Formally PPG SigmaDur 568. A 2 Part High Solids, High Build Polyurethane Gloss Finish.

From £69.60 £58.00
PPG SigmaDur 550
Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).

From £80.16 £66.80
Jotun Marathon 550
A 2 pack structural steel and piping coating that will continue to cure while immersed.

From £351.36 £292.80
*PPG SigmaCover 240 Formerly Amercoat 240
This product is now discontinued. See Hempel Hempadur 15570 as a potential alternative.

In stock
PPG SigmaCover 410 MIO
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.

From £324.00 £270.00
PPG SigmaDur 520
A 2 pack high build semigloss aliphatic acrylic polyurethane finish, Highways Approved Item No.169.

From £91.20 £76.00
PPG PSX 700 Engineered Siloxane
For steel from PPG Sigma, Ameron. Highways Approved Item No.185.

From £373.15 £310.96
PPG SigmaGuard CSF 585
WRAS Approved for drinking water. A two component solvent free amine cured epoxy coating.

From £126.72 £105.60
PPG Phenguard Subsea 780 - Formerly SigmaLine 780
A two component amine adduct cured phenolic epoxy finish designed to provide a finish coat as part of a coating system used for the protection of subs...

From £201.89 £168.24
PPG SigmaShield 1200 Formerly Amercoat 340
Formerly Amercoat 340. A two component, abrasion resistant, solvent free, amine cured, phenolic epoxy coating.

From £733.82 £611.52
PPG SigmaTherm 230 Phenolic Epoxy
A two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°...

From £499.87 £416.56
Sherwin Williams Macropoxy M922 - Formerly Transgard TG123 Epigrip
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...

From £175.52 £146.27
Sherwin Williams Macropoxy K267 MIO - Formerly Leighs Transgard TG121 Macropoxy 1210
Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference

From £118.08 £98.40
Sherwin Williams Macropoxy C123 - Formerly Leighs Epigrip C123
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123

From £134.86 £112.38
Sherwin Williams Macropoxy 400 - Formerly Leighs Epigrip C400V3
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.

From £138.97 £115.81

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)