£7.75 delivery on orders excluding certain products & postcodes *
An economical one coat primer/finish. Quick drying with high sheen level.
A very fast reacting transparent binder for blind coatings that can full cure down to 0°C.
A very fast reacting pigmented coating for use as either a base coat or top sealant in Remmers flooring systems.
A general purpose anti-corrosive metal primer, giving a high build matt finish.
A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.
A two part, chemical and abrasion resistant, glass flake reinforced vinyl ester for the internal lining of chemical storage tanks and vessels.
A light coloured, solvent free, pure epoxy coating for potable water tanks.
A two pack epoxy primer / undercoat / tie coat for internal ship spaces.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.
A quick drying alkyd primer, containing zinc phosphate to enhance it's anti-corrosion properties.
A two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.
A two-component epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.
A two-component, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.
A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.
A high quality primer used prior to painting walls and plaster. Resistant to solvents and salts.
A high quality enamel for use at temperatures up to 600°C indirect heat.
A classical low sheen finish on gates, railings, lamps, ornamental ironwork, Tudor style woodwork, barns and scoreboards etc.
Very good fouling coating that assures a totally active surface continuously renewed providing a clean hull for the whole season.
A matt, transparent sealer for use as a slip resistant topcoat for Remmers synthetic floor coatings.
A transparent priming and mortar resin floor primer for use within the Remmers OS 8 System.
For wood, GRP, steel and ferro-cement yachts and motor boats, used on all interior surfaces to provide a protective finish.
A solvent based intumescent coating for structural steel exposed to internal environments up to corrosivity category C4 (ISO 12944-2).
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.
Designed to withstand heats of up to 425°C in sheltered or interior environments.