Full Product Catalogue

A high build anti corrosive protection for steel and galvanised steel structures, including fences, galvanised ducts/cladding etc.

A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

Self adhesive and can be applied quickly and effectively to all common handrails.

A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.

A one pack coating that contains 96% zinc to provide cold galvanizing cathodic protection of ferrous metals.

A single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.

A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.

Based on high solid resins and is low VOC with excellent sag resistance and a gloss finish, ideal for the protection of ferrous steel.

A fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...

Zinga 500ml 96% Zinc aerosol with all the protection of Zinga 96% Zinc Cathodic Protection.

An aluminium flake based finishing top coat with a satin finish of pure aluminium.

A film galvanising touch up to match a hot dip galvanised surface in an easy-to-use semi gloss aerosol.

A high spec, 2 pack, anti corrosion intermediate MIO coat for steel structures at risk from severe abrasion.

Zinga Alu ZM is a quick drying one pack coating based on aluminium flakes.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A ready-to-use flexible liquid roof membrane with fibres for continuous waterproofing layers on exposed surfaces.

A zinc rich coating formulated as an easily applied, cold galvanising protector against corrosion on all ferrous metals.

A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.

A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

A two component polyamide cured vinyl epoxy based coating that is specially designed as a tie coat between epoxy primers and anti-fouling systems.

A two component water borne epoxy coating for corrosion protection. Designed for where short dry to handle and over coating times are required.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

A premium, high gloss marine enamel for use on all boat marine substrates above the waterline.