Full Product Catalogue

A low viscosity Primer/Saturant for steel and concrete.

A VOC compliant, single component, water based anti-corrosive primer/finish.

A single component, water based acrylic finish for use in industrial environments.

Formulated to provide up to 60 minutes fire protection on internal 'I' sections beams, columns and hollow sections.

Provides up to 2 hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.

A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. Provides a high quality, cosmetic finish.

A high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating.

A water-based rust remover which is 100% biological degradable and free from toxins.

Intumescent coating for 60 minutes fire resistance to structural steelwork.

A single pack solvent-based thin film intumescent coating for up to 60 minutes on structural steel.

Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration, can also be used as part of a high pressur...

A high gloss coach enamel available in historic colours.

A general purpose, versatile paint offering economical protection and decoration for the maintenance of structural steel, cladding etc.

A high build, fast drying corrosion inhibiting primer for structural steel in grey, red and other colours.

Lead Free low temperature anti-rust, corrosion resistant, top coat suitable for metal & plastic.

Sigma AquaCover 400 two component polyamine cured water borne epoxy coating for steel and concrete.

Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.

Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.

A high build polyamide cured recoatable epoxy coating.

A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116

A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.

Offers excellent penetration straight through the rust to the metal, driving out air and moisture (the causes of rust).

A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.

A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....

A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

A fast drying primer with good anti-corrosive properties and is suitable for steel and metal substrates.

A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.

A one part physically drying water borne acrylic coating, formulated as a shop primer designed for high welding and cutting speed.