Full Product Catalogue

An ideal universal primer or single coat topcoat for steel, zinc or aluminium subject to severe abrasion or chemical stresses.

Quick-drying adhesion primer for priming and undercoating new and previously painted surfaces.

Plastic end tool ideal for use on aluminium gutters and down pipes.

Single Pack Primer for Steel, Aluminium and Zinc surfaces.

A pigmented, water-borne, fast-drying 2-component coloured polyurethane / acrylic lacquer for plastic, wood, and metals.

A water-based rust remover which is 100% biological degradable and free from toxins.

A fast curing epoxy primer for use with International 3200 product series.

A unique new water based metal primer that can be used on most metal surfaces internally and externally, prior to painting.

A ready-to-use flexible liquid roof membrane with fibres for continuous waterproofing layers on exposed surfaces.

A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.

A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

A two component polyamide cured vinyl epoxy based coating that is specially designed as a tie coat between epoxy primers and anti-fouling systems.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

A premium, high gloss marine enamel for use on all boat marine substrates above the waterline.

Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

A concentrated heavy duty alkaline cleaner for cleaning heavily soiled plastic type material and contemporary cladding.

A quick drying, low odour, primer/finish coat, with stain blocking, and anti corrosion, which can be tinted to most colours.

A powerful efflorescence remover that does not require neutrilsation after use.

A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A one component physically drying acrylic, high build, fast drying coating with a matt finish for application direct to metal.

A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.

A single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.

A concentrated, solvent and acid free product for the regular maintenance of hulls, decks and other marine surfaces.