£7.75 delivery on orders excluding certain products & postcodes *
Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration, can also be used as part of a high pressur...
A high gloss coach enamel available in historic colours.
A general purpose, versatile paint offering economical protection and decoration for the maintenance of structural steel, cladding etc.
A high build, fast drying corrosion inhibiting primer for structural steel in grey, red and other colours.
Lead Free low temperature anti-rust, corrosion resistant, top coat suitable for metal & plastic.
Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.
A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116
A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.
Offers excellent penetration straight through the rust to the metal, driving out air and moisture (the causes of rust).
A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
A fast drying primer with good anti-corrosive properties and is suitable for steel and metal substrates.
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
Anti Corrosive red oxide paint for Gates, Railings Tanks and General Steel Work.
A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.
A high-performance, water based acrylic floor paint for floors, driveways and paths. Recoatable in just 1 hour.
A high build quick air-drying oxide primer for use on ferrous metals.
An industrial detergent used for degreasing oily or soiled surfaces prior to painting.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
For use on a wide variety of substrates including hand prepared rusty steel.
Suitable for use as a finishing coat for protection of structural steel.
A single component, anti corrosive, one coat, rapid drying modified alkyd primer / finish.
A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.
A two-component semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.
A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155