Full Product Catalogue

For garage, warehouses floors, concrete, tiles, ferrous steel, stainless steel, timber and galvanised steel.

Provides excellent adhesion to very smooth surfaces such as galvanised steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, d...

A fast drying anti slip floor coating that can be applied in low temperatures down to freezing.

A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.

A two component solvent free amine cured epoxy coating. It is specially designed for potable drinking water tanks.

An industry approved topcoat for metal and coated surfaces subject to highly atmospheric environments.

A super adhesive, two pack, water based epoxy primer. For very smooth, hard to adhere substrates such as tiles.

A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.

A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.

A single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.

A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.

Based on high solid resins and is low VOC with excellent sag resistance and a gloss finish, ideal for the protection of ferrous steel.

A fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...

A concentrated, solvent and acid free product for the regular maintenance of hulls, decks and other marine surfaces.

A waterbased quartz and solid surface cleaner containing a blend of surface active agents.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.

A unique new water based metal primer that can be used on most metal surfaces internally and externally, prior to painting.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A pre-treatment for galvanised steel which converts the surface nature to ensure the subsequent adhesion of a wide range of Johnstone's coatings.

A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.

A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.