Full Product Catalogue

A two component transparent polyamide cured high molecular weight epoxy sealer coating for concrete.

A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.

Special primer for matt damp substrates based on a transparent epoxy resin.

Solvent based primer on a siloxane base with a hydro­phobizing effect.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.

For wood, GRP, steel and ferro-cement yachts and motor boats, used on all interior surfaces to provide a protective finish.

A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.

A one part clear siloxane water repellent for walls and absorbent cementitious substrates.

A very durable, solvent-based, spray applied textured coating with crushed marble aggregates and special preservative agents for algae and fungal film...

For garage, warehouses floors, concrete, tiles, ferrous steel, stainless steel, timber and galvanised steel.

Premium Quality Teamac G149 Chlorinated Rubber Paint for swimming pools, ponds etc.

A good, thick and long lasting paint which is ideal for providing a long lasting, chemical resistant demarcation.

Paint for Waterproofing Basements use on Damp and Wet Walls, stops up to 34 lbs of water pressure.

A tough, durable, high opacity floor coating, contains special aggregates for outstanding slip resistance.

Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.

A two component, polyamide cured, epoxy primer that can be used as a general purpose epoxy primer, ideal for use on steel and non ferrous metals.

Solvent Based Stain Killer, high hiding formula. One coat is all that is needed to cover and seal most surfaces including suspended ceiling tiles and ...

A high performance epoxy system for application at temperatures down to 0°C.

A solvent based high performance sealer which is suitable for heavily trafficked areas.

A water based cure and seal for improving the abrasion resistance of all forms of freshly laid or existing concrete.

Perfect for use in basements and interior walls suffering from damp.

A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.

A two component, non-isocyanate epoxy acrylic gloss topcoat finish.

Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.

A Pliolite Exterior Masonry Paint. Use at low temperatures, -5°C. Showerproof in as little as 20 minutes

A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.

A single coat, fast return to surface, slip resistant floor package, suitable to cover 5m2 of surface area.