£7.75 delivery on orders excluding certain products & postcodes *
A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
Two pack polyamide cured, zinc rich coating suitable for structural steel and piping exposed in corrosivity categories up to C5.
A two component polyurethane paint with good gloss retention and colour stability.
A high zinc content primer with outstanding resistance to severe weathering.
A solvent free coating designed for installation onto steel or concrete surfaces.
For use on tanks or other steel structures, trenches, pits, secondary containment & floors, where chemical resistance is the primary concern.
A flake filled vinyl ester coating offering outstanding chemical resistance and a quick return to service.
A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. Provides a high quality, cosmetic finish.
A high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating.
Sigma AquaCover 400 two component polyamine cured water borne epoxy coating for steel and concrete.
Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.
A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116
A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.
Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.
A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.