Full Product Catalogue

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.

A concrete repair for uneven, damaged or worn out concrete and power floated floors. Can be applied from 3mm to 15mm thick.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A fast curing two part polyester anchoring adhesive that is solvent and styrene free.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

A high build epoxy paint suited for application at low temperatures.

A non-skid coating for steel decks and concrete in corrosive environments.

A two pack epoxy varnish with good penetration properties, for use in cold climates.

An epoxy vertical repair mortar for walls and overhead repairs of concrete.

Reinforced coating to provide tank bottom refurbishment with a 14 hour return to service.

A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.

An exceptionally hard wearing, pre-aggregated, water-based anti-slip floor coating.

An epoxy adhesive for structural bonding and concrete repair. For DIY and Professional applications.

A hard wearing two-component water based epoxy floor paint and wall paint for interior use. NEW FORMULATION

A two component, non-isocyanate epoxy acrylic gloss topcoat finish.

For quick repair of fine crack and holes in warehouse, workshop and concrete floors.

A two pack epoxy resin oil tolerant primer.

A very durable, solvent-based, spray applied textured coating with crushed marble aggregates and special preservative agents for algae and fungal film...

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure.

For garage, warehouses floors, concrete, tiles, ferrous steel, stainless steel, timber and galvanised steel.

A hard wearing two-component water based epoxy floor paint and wall paint for interior use.

A high build solvent free epoxy offering a smooth tile like finish, excellent protection against solvents and oils.

A fast drying anti slip floor coating that can be applied in low temperatures down to freezing.

Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.