Hempel Topcoats

A self-priming, two-component, high-build, pure epoxy paint.

A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.

A two-component epoxy paint, which cures to a hard and tough coating.

A self-priming, two-component, high build epoxy paint containing zinc phosphate.

Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.

Glossy, general purpose topcoat. For mildly to moderately corrosive environment. For exterior and interior usage.

An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112

A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

This product is now discontinued. See Hempel Hempaline Defend 630 as a potential alternative.

Suitable for use as a finishing coat for protection of structural steel.

This product is now discontinued. See Hempel 43700 as a potential alternative.

A primer, intermediate or finishing coat in Hempatex systems in moderately corrosive environment.

A two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and colour retention.

A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

A two-component semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

A finishing coat based on acrylic resin and non chlorinated plasticizer for optimum gloss and colour retention.

A water-borne, acrylic dispersion based paint for interior and exterior moderate to sever corrosive environments.

A two-component polyamide adduct-cured epoxy paint. BBA Cert. no. 08/H135-PS11. Highways Approved Item No.159.

A quick drying, anti-corrosive finishing coat for steel.

A quick drying topcoat for steel, with excellent colour retention.

An ultra high solids and very low VOC epoxy coating.

A high build bituminous coating for steelwork. Bitumen based high build coating.

A two component polyurethane paint with good gloss retention and colour stability.

A high build epoxy paint suited for application at low temperatures.

A non-skid coating for steel decks and concrete in corrosive environments.